Example 2
：
Start
→
Place command to CCD
Flash mode
→
Turning on Flash mode
Start
→
Place command to CCD
Flash On/Off
→
Turn on Flash on/off time setting
Appendix A
"0",”6”
→
Setting Flash on 0.6 sec
Appendix A
"0",”A”
→
Setting Flash off 1 sec
Example 3
：
Start
→
Place command to CCD
Interleaved 2 of 5 On
→
Turning on Interleaved 2 of 5
Define length
→
Define interleaved 2 of 5
Appendix A "0",
"
A
"
→
Length with is equal to 10
Appendix A "0",
"
C
"
→
Length with is equal to 12
SET
Only length 10 is set
Appendix A "0",
"
E
"
→
Length with is equal to 14
All 3 length (10,12,14) are set
completely.
No need to scan “SET” again.
SET
Both length 10 & 12 are set
You will be able to read the interleaved 2 of 5 code length
which is equal to 10, 12, 14 digits only.
All Appendix A are no need to scan “END”
8
