S
TEP 5
Place the desks tops on. Attach the two sections of top together
using the connector plate on the underside of the tops. Once the two
pieces are lined up use (8) #14 x 1” lag screws to join them together.
Adjust the top so there is a 1 inch overhang on the front edge of the
desk. Attach the top with #14 x 1” lag screws by screwing into
the underside of the top through the open mounting holes in
the top of the leg assemblies, modesty panels, cabinet, and triangle
support bracket. (View illustration).
Re-Install drawers once top is secured.
#14 x 1”
Lag Bolt
Top
Leg
S
TEP 4
Attach the return leg base assembly to the main desk leg base assembly using (3) 1/4-20 X 3/4”
flange head bolts. Panels must be oriented as shown below.
1/4-20 x 3/4”
Flange Head Bolt
