SRI-205
TOOLS REQUIRED
FOR ASSEMBLY
Socket Set, Electric Hand Drill, Phillips Head Bit, 3/8"
Magnetic Hex Driver Bit.
BEFORE ASSEMBLING THE WORKBENCH
Read through the assembly instructions to
familiarize yourself with the order in which the parts
are assembled.
We suggest that you clear & vacuum the area where
the desk is to be assembled.
It is important that the desk is assembled in the
same sequence as instructed.
HARDWARE
All assembly hardware is provided.
S
TEP 1
Attach the left and right leg panels to the
modesty panel using three 1/4-20 x 3/4"
flange head bolts per side. Panels must be
oriented as shown below. Attach the
triangular shape top support bracket to the
inside of the leg as shown by the red arrow
using (2) 1/4-20 x 3/4” flange head bolts.
1/4-20 x 3/4”
Flange Head Bolt
