GMI GDUnet, User Handbook Manual

Page: 49 / 122

flexiCal net OPERATION
3-23
Fig. 3-30 Edit High Gas Limit
Warning: Care should be taken if editing gas limits.
3. Type new value in editing panel.
4. Select button to store updated value.
3.4.3 Edit 100% LEL Conversion Factors
The advanced editor window displays the default 100% LEL
conversion factors for Methane, Pentane, Propane and Butane
calibration gases, as illustrated in Fig. 3-31.
Fig. 3-31 Default Conversion Factors
1. To edit the conversion factor (Methane in example), use cursor
to select a new value from the drop down list, as illustrated
in Fig. 3-32.