Page 16
www.GoGMG.com
8ƾnjǍǍǁƾ7ǍƾƾNjǂLJǀ
25. Activate the Drive functions by pressing the DRIVE-FUNCTION BUTTON.
Once pressed - the LED light in this button will illuminate.
26. Press and hold the FUNCTION ENABLE SWITCH on the control handle.
27. Depress the THUMB ROCKER SWITCH on top of the control handle in the direction identified
by the blue left arrow on the control panel. The steer wheels should turn in the direction that the
blue left arrow points on the control panel.
28. Depress the THUMB ROCKER SWITCH in the direction identified by the yellow right arrow on
the control panel. The steer wheels should turn in the direction that the yellow right arrow points
on the control panel.
8ƾnjǍ(NjǂǏƾƺLJƽ&NjƺDŽǂLJǀ
29. Press and hold the Function Enable Switch on the control handle.
30. Slowly move the control handle forward/downward until the machine begins to move, then
return the handle to the center position.
The machine should move forward, in the direction of the steering wheels, then come to an
abrupt stop.
31. Press and hold the Function Enable Switch on the control handle.
32. Slowly move the control handle rearward/upward until the machine begins to move, then return
the handle to the center position.
The machine should move rearward, in the direction of the platform entry, then come to an
abrupt stop.
Note:
The brakes must be able to hold the machine on any slope it is able to climb.
Check the area above and around the machine for obstructions and electrical power
lines before operating the machine.
)džƾNjǀƾLJƼǒ7ǍLjlj
•
Push in the EMERGENCY STOP to the OFF position at the lower controls or the platform controls
to stop all machine functions.
•
If any function operates when either EMERGENCY STOP is pushed in, repair the EMERGENCY
STOP function before using the machine.
If the control system fails while the platform is elevated, use the emergency
lowering procedure to safely lower the platform.
Do not climb down the scissor assembly or exit the platform.
)džƾNjǀƾLJƼǒ0LjǐƾNjǂLJǀ
The Emergency Lowering System is used to lower the platform in case of power failure.
•
Pull the Emergency Lowering Handle to lower the platform.
GMG
*YRGXMSR8IWXWERH3TIVEXMRK-RWXVYGXMSRW
Summary of Contents for 2646E-OR
Page 39: ...www GoGMG com Page 36 2...
