Page 10
Instruction Manual
TX630
to turn the Button Beeps
tones on or off
From the Standby mode:
1. Press the
moDe
key SIX times to select
the Button Beep setting mode. ‘bP’
will be displayed along with a flashing
icon.
. Press the or keys to set the beep
to
on
or
of
as desired.
3. Press and hold the
moDe
key (or press
the PTT key momentarily) to confirm
and store your selection. If the Button
Beep function is on, the icon will
remain steady on the display and a
beep will be heard in response to key
activations.
7. Call alarm Selection
The TX630 provides 5 user selectable call
alarm melodies to alert other users to your
incoming call. When enabled, the melody
can be transmitted to another user where it
will be heard in the speaker of the receiving
radio.
to select your favourite
call alarm melody
From the Standby mode:
1. Press the
moDe
key SEVEN times to
select the Call Alarm setting mode. ‘C’
will be displayed.
. Press the or keys to preview (listen)
to the 5 available call melodies.
3. To turn the call melodies off, select
of
.
4. Press and hold the
moDe
key (or press
the
Ptt
key momentarily) to confirm and
store your selection.
to send the call alarm melody
Press the PTT switch twice quickly. The LED
indicator will light Red for a few seconds as
the melody is sent. The melody will be heard
in the speaker of the receiving radio.
CtCSS tone freQUenCieS
#4#33¬ ¬¬¬¬¬¬¬¬&REQ¬(Z¬¬¬¬¬¬¬¬¬¬¬¬¬¬#4#33¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬&REQ¬(Z
¬¬
