PAGE 16
INSTRUCTION MANUAL
TX6100
7. Roger Beep Tone Settings
The Roger Beep is a tone which is
automatically transmitted whenever the
PTT
switch is released. This tone alerts
the receiving party that your transmission
has ended.
To enable or disable the Roger Beep tone:
From the Standby mode:
1. Press the
MODE
key
SEVEN
(
7
) times
to select the Roger Beep setting mode.
‘Rb’ will be displayed along with a
flashing
.
2. Press the or keys to set the tone
to
on
or
oFF
as desired.
3. Press and
hold
the
MODE
key (or press
the
PTT
key momentarily) to confirm
and store your selection. If the Roger
Beep function is on,
will remain
steady on the display.
8. Button Beep Tone Settings
The Button beep tone feature allows
the Radio to sound a confirmation tone
whenever the
SQL
,
SCAN
,
MODE
, ,
or
DUP
keys are pressed.
To turn the Button Beep Tones On or Off:
From the Standby mode;
1. Press the
MODE
key
EIGHT
(
8
) times
to select the Button Beep setting
mode. ‘bP’ will be displayed along
with a flashing icon.
2. Press the or keys to set the beep
to
on
or
oFF
as desired.
3. Press and
hold
the
MODE
key (or
press the PTT key momentarily) to
confirm and store your selection. If the
Button Beep function is on, the icon
will remain steady on the display and a
beep will be heard in response to key
activations.
9. Call Alarm Selection
The TX6100 provides 5 user selectable call
alarm melodies to alert other users to your
incoming call. When enabled, the melody
can be transmitted to another user where
it will be heard in the speaker of the
receiving radio.
To select your favourite call
alarm melody:
From the Standby mode;
1. Press the
MODE
key
NINE
(
9
) times to
select the Call Alarm setting mode. ‘C’
will be displayed.
2. Press the or keys to preview
(listen to) the 5 available call melodies.
3. To turn the call melodies off, select
oFF
.
4. Press and
hold
the
MODE
key (or press
the
PTT
key momentarily) to confirm
and store your selection.
