PAGE 2
INSTRUCTION MANUAL
SOUND SAFE
DuST fILTER
POwER LED
LATCHES TO OPEN
ON/Off VOLuME
Fig. 1
controls
1.
Power / volume knob:
To optimise your speaker’s sound, set your audio device’s volume
– (MP3 player, iPod
®
, iPhone
®
or smartphone) to between the 70-80% levels. Rotate the
Sound Safe Plus’s volume knob to the right to increase volume. To turn the Sound Safe off,
turn the knob to the left until a ‘click’ is heard and the LED above the volume knob turns off.
2.
Power LED:
The LED above the volume knob illuminates when the unit is ‘on’ indicating that
the batteries are in use, even if you do not hear any sound from the speaker. To optimise the
lifespan of the
batteries, turn the Sound Safe ‘off’ when not listening to music.
InstallIng tHe BatterIes
1. Open the unit by pressing down on the release buttons and swinging the safety latches
open as shown in Fig.2.
2. Locate the release button on the battery cover as
shown in Fig.3 and press inwards and upwards
to release.
3. Insert 3 x AA batteries into the battery compartment
ensuring the correct orientation as marked.
4. Replace the battery cover by locating the lugs and
swinging to close until it ‘clicks’.
IMPORTANT:
Use new or fully charged quality batteries. Poor quality batteries may result
in audio distortion or hum from the speaker.
Fig. 2