PAGE
INSTRUCTION MANUAL
RM600D
REAR PANEL CONNECTIONs
PLEAsE NOTE
The GME RM600D is a remote unit to suit the
GX600D. Please refer to your GX600D manual for
operating instructions and operator qualifications.
INTRODUCTION
Congratulations on your purchase of the GME RM600D.
With its compact size and waterproof design it can easily be
installed into almost any panel mounting location in your fly
bridge or cabin.
The RM600D is totally designed and manufactured at our
factory in Gladesville, Australia. Precision robots and the
very latest manufacturing techniques ensure a consistent
high quality is maintained, resulting in a communications
system of extreme reliability and performance.
ACCEssORIEs sUPPLIED
The RM600D is supplied with the following.
• Mounting bracket and Gimball knobs
• DC battery lead
• Remote interconnecting cable
• MC504 microphone
• Mounting hardware
• Information leaflet
Please immediately contact your point of purchase if any
of these components are missing.
RM600D REMOTE UNIT
The RM600D remote unit provides a remote head
connection to allow operation of the GX600D from
a flybridge or second station on your vessel.
The RM600D conveniently plugs into the GX600D using
an interconnecting cable and no additional interface
wiring is required.
The RM600D is supplied with a DC lead for connection
to a Volt power source and 5 metres of terminated
interconnecting cable. Additional terminated cables are
available in 5 and 0 metre lengths.
When connected, the RM600D can duplicate all functions
of the GX600D. In addition it includes an Intercom feature
that allows internal communications between the GX600D
and the RM600D.
The RM600D is supplied with a standard PTT microphone
which is interchangeable with the alphanumeric
microphone supplied with the GX600D: Because of the
additional functions accessible from the alphanumeric
microphone, master control is given to whichever device
has the alphanumeric microphone connected: However
the main unit GX600D always has priority. If the GX600D
is switched off the system will not operate and no back
lighting will show on the RM600D LCD display. Before
changing the microphones, both units should be
switched off.
Note: Only one alphanumeric microphone should be
connected to any GX600D/RM600D combination.
REsTRICTIONs OF UsE
European Telecommunications Standard Institute (ESTI) has
stipulated the specific requirements (EN 30 05-//3) for
marine radio with class D DSC feature. This equipment is not
for use on SOLAS vessels or vessels on inland waterways. This
radio is intended for use in European countries: DK, FI, FR,
DE, GR, IE, IT, MT, NL, PT, ES, SE, GB, IS, NO AND TR.
Mounting Bracket
DC Power Cable Extension Speaker Socket
Gimbal Knob
Inter Connecting
Cable to main unit
0168
!
