GME PG-28, User Manual

Page: 6 / 15

Understanding the Front Panel
www.gmetechnology.com 1
1. Power ON/OFF switch
This Power ON/OFF switch is on the left
side of the unit. Slide the switch upward
to turn the unit on and downward to turn
the unit off.
2. Power ON/OFF LED
Power is ON when the LED lights up and
power is OFF when the LED is off.
3. Battery Low LED
When the PG-38 is operating on a
standard 9V battery and the voltage on
the battery has drop down to around 5V,
this green LED will turn on indicating
the voltage on the battery is low.
1
2
7
9
4
3
5
6
8
4. 9V AC adaptor input
The user may connect a 9V 100mA
5.5mm x 2.1mm
center positive AC
adaptor (not included) to power the PG-
38.
5.
Scanning Format switch
Use this selector to choose between PROGRESSIVE or INTERLACE scanning system.
6.
Video Pattern button
Use this button to cycle through one of the following video patterns:
COLOR BARS CROSS HATCH DOT
STAIRCASE CIRCLE CENTER CROSS
WINDOW RASTER
NOTE : Holding down this button will display previous patterns in reverse order until COLOR
BARS pattern is reached.
7. RF Video Output (BNC connector)
RF video is output on Channel 3 with 1kHz audio test tone. Connect this to the TV’s antenna
connector and switch to Channel 3 for video signal.
8.
S-Video output
Connect this to TV’s s-video input for video signal
9. Composite Video Output (RCA connector)
Connect this to TV’s composite video input for video signal