GME HG139, User Manual

Page: 7 / 18

www.gmetechnology.com 3
Basic Operation
1. a: Connect the Y, Pb, and Pr connectors on the HG139 to the HDTV Y, Pb, and Pr
component video inputs respectively. The Y is the luminance signal, and Pb and Pr are the
chrominance (color) signals. The Y signal will drive a 1V peak-to-peak signal into a 75-ohm
load, and the Pb and Pr signals will drive 0.7V peak-to-peak signals into 75-ohm loads.
b: In the case of testing NTSC TV, connect the Y connector on HG139 to the composite
video input on the TV. This connection provides no chrominance, so Color Bars and Raster
will display only luminance with no color. The other patterns will display normally.
2. Using the video format selector, select the appropriate video format on the HG139. Available
video formats include 1080i, 720p, 480p, and NTSC.
3. Slide the power switch to turn on HG139.
4.
Use the video pattern button to select the desire video pattern for display. Available video
patterns include COLOR BARS, CROSS HATCH, STAIRCASE, MULTIBURST,
OVERSCAN-BOUNCE , PLUGE, NEEDLE, CHECKER, and RASTER (White, Yellow,
Cyan, Green, Magenta, Red, Blue, and Black).
NOTE: Holding down the video pattern button will display previous patterns in reverse order
until COLOR BARS pattern is reached