1 2
I N S T R U C T I O N M A N UA L
G X 7 5 0
To switch immediately to a stored working channel (PR1 or PR2)
Briefly press the
PR1
or
PR2
key. Scanning will be cancelled and the radio will switch to the
channel stored in the selected memory.
SCANNING NOTES
1. Each channel set has its own independent scan memory. i.e. Scan channels stored under
the International channel set can be different to those stored under the USA or Canadian
channel sets.
2. If the GX750 is switched off while it is scanning, it will resume scanning automatically when
it is switched ON again.
3. A minimum of 2 channels is required in the scan memory before scanning is allowed. If there
are less that 2 channels in the scan memory, pressing the
SCN
key will give a low beep and
the scan will be ignored.
4. The
PTT
and
LO
keys are disabled while scanning
Scanning with Dual Watch
If Dual Watch is selected while scanning, the ‘DW’ and ‘SCN’ icons will be displayed and
channel 16 will be inserted into the scan every 2 seconds.
Scanning with Triple Watch
If Triple Watch is selected while scanning, the ‘TW’ and ‘SCN’ icons will be displayed and both
channel 16 and the PR1 channel will be inserted into the scan every 2 seconds.
INSTALLATION
500 mm
interconnecting lead
AB
13.8V DC
LCD Controller Microphone
VHF antenna
Main unit
Panel
socket
8 pin
socket
NOTE:
Your GX750 is designed for connection to negative earth electrical systems only.
Optional extension speaker
