background image

GX600A 

INSTRUCTION MANUAL 

PAGE 11

TThis warranty against defects is given by Standard 
Communications Pty Ltd ACN 000 346 814 (We, us, our 
or GME). Our contact details are set out in clause 2.7. This 
warranty statement only applies to products purchased in 
Australia. Please contact your local GME distributor for 
products sold outside of Australia. Local distributor details at 
www.gme.net.au/export.

1.  Consumer guarantees

1.1  Our goods come with guarantees that cannot be 

excluded under the Australian Consumer Law. You 
are entitled to a replacement or refund for a major 
failure and for compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to 
have the goods repaired or replaced if the goods fail 
to be of acceptable quality and the failure does not 
amount to a major failure.

1.2  To the extent we are able, we exclude all other 

conditions, warranties and obligations which would 
otherwise be implied.

2.   Warranty against defects

2.1  This warranty is in addition to and does not limit, 

exclude or restrict your rights under the Competition 
and Consumer Act 2010 (Australia) or any other 
mandatory protection laws that may apply.

2.2  We warrant our goods to be free from defects in 

materials and workmanship for the warranty period 
(see warranty table) from the date of original sale (or 
another period we agree to in writing). Subject to our 
obligations under clause 1.2, we will at our option, 
either repair or replace goods which we are satisfied 
are defective. We warrant any replacement parts for the 
remainder of the period of warranty for the goods into 
which they are incorporated.

2.3  To the extent permitted by law, our sole liability for 

breach of a condition, warranty or other obligation 
implied by law is limited 

 

  (a)  in the case of goods we supply, to any one of the 

following as we decide -

 

    (i)   the replacement of the goods or the supply of 

equivalent goods;

 

    (ii)  the repair of the goods; 

 

    (iii)  the cost of repairing the goods or of acquiring 

equivalent goods; 

 

  (b)  in the case of services we supply, to any one of the 

following as we decide – 

 

    (i)   the supplying of the services again; 

 

    (ii) the cost of having the services supplied again.

2.4  For repairs outside the warranty period, we warrant 

our repairs to be free from defects in materials and 

workmanship for three months from the date of the 
original repair. We agree to re-repair or replace (at our 
option) any materials or workmanship which we are 
satisfied are defective.

 2.5  We warrant that we will perform services with 

reasonable care and skill and agree to investigate any 
complaint regarding our services made in good faith. 
If we are satisfied that the complaint is justified, and 
as our sole liability to you under this warranty (to the 
extent permitted at law), we agree to supply those 
services again at no extra charge to you.

2.6  To make a warranty claim you must before the end of 

the applicable warranty period (see warranty table), 
at your own cost, return the goods you allege are 
defective, provide written details of the defect, and give 
us an original or copy of the sales invoice or some other 
evidence showing details of the transaction.

2.7  Send your claim to:  

Standard Communications Pty Ltd.  
Unit B, 22-24 College Street,  
Gladesville, NSW 2111, Australia.  
Tel: (02) 9879 8888  Fax: (02) 9816 4722.  
Email: [email protected]

2.8  If we determine that your goods are defective, we will 

pay for the cost of returning the repaired or replaced 
goods to you, and reimburse you for your reasonable 
expenses of sending your warranty claim to us. 

3.  What this warranty does not cover

3.1  This warranty will not apply in relation to: 
 

  (a) goods modified or altered in any way;

 

   (b)  defects and damage caused by use with non 

Standard Communications products;

 

   (c)  repairs performed other than by our authorised 

representative;

 

   (d)  defects or damage resulting from misuse, accident, 

impact or neglect;

 

   (e)  goods improperly installed or used in a manner 

contrary to the relevant instruction manual; or

 

   (f)  goods where the serial number has been removed 

or made illegal.

4.  Warranty period

4.1  We provide the following warranty on GME and Kingray 

products. No repair or replacement during the warranty 
period will renew or extend the warranty period past 
the period from original date of purchase.

 

STANDARD COMMUNICATIONS WARRANTY AGAINST DEFECTS

PRODUCT TYPE

WARRANTY 

PERIOD

VHF marine transceivers

1 year

Summary of Contents for GX600A
















Reviews: