4
|
SR500
User Manual
To mount the SR500 using emergency mounting method 2:
1) Fit the extension pole into the SR500 and screw it into the device.
2) Pass the extension pole through the life raft canopy port hole and secure the pole in a vertical position.
13
3.1.3 Mounting Process
Figure 3-1-3 Mounting process
NOTE: In both installation methods, the PLOMO-500 unit should be kept at least 1 meter
above sea level. Generally, method 2 is more effective for transmitting AIS
signals.
Step 1:
Release buoyant lanyard
and tight at hook of
PLOMO-500.
Step 2:
Fix and position
PLOMO-500 at the top of
Life Boat.
Step 1:
Connect and rotate
extension pole to
PLOMO-500 and extend
pole up to 1 meter.
Step 2:
Find the doorway
entrance and locate the
pole in vertical position at
Life Boat.
Installation Method 1
Installation Method 2
Note:
• Tying the buoyant lanyard between the device and the life boat can prevent losing the device accidentally
• Keep the device at least one metre above sea level to allow efficient operation
Deactivation Process
To deactivate the SR500:
1) Press and hold the TEST button for three seconds to initiate deactivation.
2) Keep pressing and holding TEST until the ON LED stops flashing.
The SR500 is deactivated.
Note:
When deactivated all the LEDs are off. If LEDs are still flashing press and hold the TEST button again for three seconds to
deactivate the device.
