background image

28

GME  ELECTROPHONE  limit  this  warranty  to  the 
original purchaser of the equipment.

GME ELECTROPHONE warrant this product to be 
free from defects in material and workmanship for a 
period of twenty four (24) months from the date of 
purchase from their authorised dealer.

GME ELECTROPHONE  warrant  the  battery  pack 
used  with  this  product  to  be  free  from  defects  in 
material and workmanship for a period of three (3) 
months  from  the  date  of    purchase  from  their 
authorised dealer.

Should  the  product  require  servicing  during  this 
period,  all  labour  and  parts  used  to  effect  repairs 
will  be  supplied  free  of  charge.    GME 
ELECTROPHONE  reserve  the  right  to  determine 
whether damage has been occasioned by accident, 
misuse  or  improper  installation  whereby  the 
warranty would be void, including:

Equipment which has been damaged due to:

(a)  Incorrect  or  reverse  polarity  connection  to  a 

battery or power supply.

(b)  Connection to incorrect supply voltage.

(c)  Operation without an antenna or by connection 

to  an  antenna  which  has  been  incorrectly 
installed,  resulting  in  damage  to  the 
transceiver’s output transistors.

(d)  Effects of water or moisture penetration.

(e)  Non-factory modifications.

Procedure to be followed by claimant:  In the event 
of a defect occurring during the warranty period, the 
original  Purchaser  may  return  the  defective  unit 
along  with  suitable  proof  of  purchase  date  (i.e. 
receipt,  docket,  credit  card  slip  etc.)  and  a  full 
description  of  the  defect  to  the  Dealer  from  whom 
the unit was purchased.

All freight charges incurred for transportation by the 
Dealer  or  GME  ELECTROPHONE  are  the 
Purchaser’s responsibility.

The Dealer will forward it to the closest authorised 
GME  ELECTROPHONE  Service  Depot  in  your 
particular State.

Your ELECTROPHONE transceiver is especially designed for the environment encountered in domestic or 
mobile installations.  The use of all solid state circuitry, careful design and rigorous testing, result in high 
reliability.  Should failure occur however, GME ELECTROPHONE maintain a fully equipped service facility 
and spare parts stock to meet the customer’s requirements long after expiry of the warranty period.

A Division of

Head Office: SYDNEY

6 Frank Street,
GLADESVILLE  2111
(02) 9844 6666
Fax : (02) 9844 6600

MELBOURNE

103 Woodlands Drive,
BRAESIDE  3195
(03) 9590 9333
Fax : (03) 9590 9344

BRISBANE

Unit 1, 89-101 Factory Rd.,
OXLEY  4075
(07) 3278 6444
Fax : (07) 3278 6555

ADELAIDE

Unit 1, 4 West Thebarton Rd,
THEBARTON  5031
(08) 8234 2633
Fax : (08) 8234 5138

AUCKLAND

P.O. Box 58446
GREENMOUNT
(09) 274 0955
Fax : (09) 274 0959 

PERTH

Unit 1, 10-12 Harvard Way,
CANNING VALE  6155
(08) 9455 5744
Fax : (08) 9455 3110

STANDARD COMMUNICATIONS 

PTY. LTD.

Part No. 310105
Dwg No. 40805
Issue 04

WARRANTY

GME ELECTROPHONE AFTER SALES SERVICE

Summary of Contents for TX7000 SERIES





























Reviews: