GMDE Powervortex 306KTL
Global Mainstream Dynamic Energy Technology Ltd.
37
(c) Setting not successful
(d) Setting successfully
(e) Not supported at solution 2 (f) Not supported during the inverter running
Figure 39 Battery setting
After setting the parameters of the battery packs, shut down the DC switch and follow the setting &
starting procedures in section 3.1.
4.3.5 Local Address
Note: In solution 1 with integrated EMS, the local address will not be used since the inverter does not
communicate with any external system. In solution 2 with external EMS, the inverter is controlled by
external commands through RS485. Hence the local address is required to set up the communication
channels between inverters and energy management system.
In this menu, user could set the local address by the following procedures.
