GMC YUKON 2018 Owner'S Manual Download

Page: 181 / 425

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-11349262) - 2018 - crc - 6/20/17

180

Climate Controls

Climate Control Systems

Dual Automatic Climate

Control System . . . . . . . . . . . . . 180

Rear Climate Control

System . . . . . . . . . . . . . . . . . . . . . . 184

Air Vents

Air Vents . . . . . . . . . . . . . . . . . . . . . 185

Maintenance

Passenger Compartment Air

Filter . . . . . . . . . . . . . . . . . . . . . . . . 186

Service . . . . . . . . . . . . . . . . . . . . . . . 187

Climate Control
Systems

Dual Automatic Climate
Control System

With this system the heating,
cooling, and ventilation in the
vehicle can be controlled. Some
climate control settings can be
changed. See

“

Climate and Air

Quality

”

under

Vehicle

Personalization

158

1. Driver Temperature Control

2. A/C (Air Conditioning)

3. Air Delivery Mode Controls

4. Fan Control

5. Defrost

6. Passenger Temperature

Control

7. SYNC (Synchronized

Temperature)

8. Rear Window Defogger

9. RCTRL (Rear Climate Control

Lockout)

10. Rear Temperature Control

11. Rear Air Delivery Mode Control

12. Rear Fan Control

13. Front Climate Control Power

Button

14. Rear AUTO (Automatic

Operation)

15. Rear Climate Control Power

Button

16. Air Recirculation

17. AUTO (Automatic Operation)

Summary of Contents for YUKON 2018










































































































































































































































































































































































































































Search results

Summary of Contents for YUKON 2018

Reviews:

Related manuals for YUKON 2018

Brands by name

Popular brands

GMC YUKON 2018, Owner'S Manual

Search results

Summary of Contents for YUKON 2018

Reviews:

Related manuals for YUKON 2018

Brands by name

Popular brands