GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-MidEast-
15231009) - 2022 - CRC - 5/25/21
Instruments and Controls
105
amber. See
and
Tire Pressure Monitor Operation
.
Air Filter Life :
Shows an estimate of the
engine air filter
’
s remaining useful life and
the state of the system. Engine Air Filter Life
95% means 95% of the current air filter life
remains. Messages will display based on the
engine air filter life and the state of the
system. When the REPLACE AT NEXT OIL
CHANGE message displays, the engine air
filter should be replaced at the time of the
next oil change. When the REPLACE SOON
message displays, the engine air filter
should be replaced at the earliest
convenience.
The Air Filter Life display must be reset after
the engine air filter replacement. To reset,
see
Fuel Economy :
The center displays the
approximate instantaneous fuel economy as
a number and bar graph. Displayed above
the bar graph is a running average of fuel
economy for the most recently traveled
selected distance. Displayed below the bar
graph is the best average fuel economy that
has been achieved for the selected distance.
The selected distance is displayed at the top
of the page as
“
last xxx mi/km.
”
Press
p
to select the distance or reset best
value. Use
w
and
x
to choose the
distance and press
V
. Press
w
and
x
to
select
“
Reset Best Score.
”
Press
V
to reset
the best average fuel economy. After reset,
the best value displays
“
-,-
”
until the
selected distance has been traveled.
The display provides information on how
current driving behavior affects the running
average and how well recent driving
compares to the best that has been
achieved for the selected distance.
Average Speed :
Displays the average
vehicle speed of the vehicle in kilometers
per hour (km/h) or miles per hour (mph).
This average is based on the various vehicle
speeds recorded since the last reset. Reset
the average speed by pressing
V
when it is
displayed.
Timer :
This display can be used as a timer.
To start the timer, press
V
while this
display is active. The display will show the
amount of time that has passed since the
timer was last reset. To stop the timer,
press
V
briefly while this display is active
and the timer is running. To reset the timer
to zero, press and hold
V
while this display
is active, or press
p
and select reset.
Follow Distance :
If equipped, the current
follow time to the vehicle ahead is displayed
as a time value on this page.
Battery Voltage :
Displays the current
battery voltage, if equipped. Battery voltage
changes are normal while driving. See
. If there is a
problem with the battery charging system, a
DIC will display a message.
Coolant Temperature :
Displays the coolant
temperature in degrees Celsius (°C) or
degrees Fahrenheit (°F).
Economy Trend :
Shows history of the
Average Fuel Economy from the last 50 km
(30 mi). Each bar represents about 5 km
(3 mi) of driving. During driving the bars will
shift to always reflect the most recent
distance on the right side. Press and hold
V
to clear the graph or press
p
to reset
through the menu.
Oil Pressure :
Oil pressure is displayed in
either kilopascal (kPa) or in pounds per
square inch (psi). Oil pressure can vary with
engine speed, outside temperature, and oil
