Easy Exit Seat
The controls for this memory function are located on the
driver’s door.
B
(Easy Exit Seat): This button is used to program
and recall the desired driver’s seat position when exiting
or entering the vehicle. The seat position can be
saved for up to two drivers.
To store the seat exit position, do the following:
1. Press and release the 1 or 2 button. The seat will
move to the stored memory position.
2. Adjust the seat to the desired exit position.
3. Press and hold the exit button of the memory
control for three seconds. A double chime will sound
to let you know that the position has been stored
for the selected button 1 or 2.
To repeat the procedure for a second driver, follow
the preceding steps, but press the other numbered
memory control button.
To use the seat exit position, do one of the following:
•
Press the exit button on the memory control, or
•
If this feature is activated in the DIC, removing the
key from the ignition will move the seat to the exit
position.
See “Easy Exit Seat” under DIC Vehicle Customization
on page 3-56 for more information on activating this
feature in the DIC.
2-45
Summary of Contents for Sierra Denali 2006
