GMC Savana 2020, Owner'S Manual, Page: 271 / 360

GMC Savana Owner Manual (GMNA-Localizing-U.S./Canada-13882574) -
2020 - CRC - 6/7/19
270 Vehicle Care
unusual wear continues after the
rotation, check the wheel
alignment. See
When It Is Time
for New Tires 0 271 and
Wheel Replacement 0 275 .
If the full-size spare tire is part of
the tire rotation, make sure the
tire rotated into the spare
position is stored securely.
Push, pull, and then try to rotate
or turn the tire. If it moves, use
the wheel wrench/hoist shaft to
tighten the cable. See
Tire
Changing 0 278 .
Use this rotation pattern when
rotating the tires if the vehicle
has single rear wheels.
Use this rotation pattern when
rotating the tires if the vehicle
has dual rear wheels.
When installing dual wheels,
check that the vent holes in the
inner and outer wheels on each
side are lined up.
Adjust the front and rear tires to
the recommended inflation
pressure on the Tire and
Loading Information label after
the tires have been rotated. See
Tire Pressure 0 264 and
Vehicle Load Limits 0 159 .
Reset the Tire Pressure Monitor
System. See
Tire Pressure
Monitor Operation 0 266 .
Check that all wheel nuts are
properly tightened. See
“ Wheel
Nut Torque ” under Capacities
and Specifications 0 319 .
{
Warning
Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
off and cause a crash. When
changing a wheel, remove any
rust or dirt from places where the
wheel attaches to the vehicle. In
an emergency, a cloth or a paper
towel can be used; however, use
a scraper or wire brush later to
remove all rust or dirt.