Engine
Marine/Industrial 4.3L 6-133
2000 Marine/Industrial
334336
334342
334329
3. Apply clean engine oil to the crankshaft bearing journals.
4. Install the crankshaft.
7. Install the crankshaft bearing caps in the original position
and with the arrow on the crankshaft bearing caps in the
direction of the front of the engine block.
Notice: Refer to Fastener Notice in Cautions and Notices.
8. Install the crankshaft bearing cap bolts until snug.
9. Thrust the crankshaft rearward in order to set and align the
crankshaft thrust bearings and the crankshaft bearing caps.
10. Thrust the crankshaft forward in order to align the rear faces
of the crankshaft thrust bearings.
11. Tighten the crankshaft bearing cap bolts.
Tighten
11.1. Tighten the crankshaft bearing cap bolts on the first
pass to 20 N•m (15 lb ft).
5. Install the crankshaft bearings into the crankshaft bearing
caps.
6. Apply clean engine oil to the crankshaft bearings.
Summary of Contents for Powertrain 4.3 L
