66
Warning.
The guard is vital for your and other people’s
safety and for the machine’s operating efficiency.
•
Do not try to stop the cutting device (nylon line) with
your hands. Always let it come to a stop by itself.
Warning.
After switching off the machine, the cutting
device continues to rotate for a few more seconds.
•
Only use the original type of nylon line. Under no
circumstances use metal line instead of nylon.
•
Do not use the machine to cut grass which is not on
the ground. For example, do not cut grass which is on
walls or rocks.
•
Do not switch on the machine in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids, gasses and
powders.
•
Only cut during broad daylight or with adequate
artificial light.
•
Check that all grass cuttings and dirt have been
removed from the ventilation vents.
•
Do not cross roads or gravel paths with the machine
still running.
•
When the machine is not in use, store it in a dry place
and out of reach of children.
•
After use, disconnect the machine from the power
supply and check for damage. If you have the slightest
doubts, contact an authorised service centre.
•
Only use the machine according to the instructions
given in this manual.
•
Check regularly that the screws are tight.
•
Do not try to repair the machine or access internal
parts. Contact authorised service centres only.
•
Do not get distracted and always concentrate on what
you are doing. Use common sense. Never operate the
machine when you are tired, sick or under the influence
of alcohol or other drugs.
Wear goggles
Wear ear defenders
Wear a breathing mask
Unpacking
Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool
until the parts have been replaced or the fault has been
rectified. Failure to do so could result in serious
personal injury.
Contents of carton
•
Blade guard
•
Edging wheel
•
Secondary handle
•
4 Screws and washers
