3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards
for electromagnetic compatibility.
Specifications
Voltage:
230–240V ~ 50 Hz
Power input:
750W
No load speed:
800 to 3000 min
-1
Blades:
‘U’ and ‘T’ Shank blades
Pendulum:
3 Stage
Cutting angle range:
0° to 45°, left and right
Cutting depth in:
Wood:
100mm
Steel:
8mm
Sound pressure level:
94.5 dB(A)
Weight:
2.7 kg
Laser class:
2
Laser wavelength:
400–700nm
Laser output power:
≤1mw
Introduction
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
WARNINGS
1. It may be more difficult to see the laser line in
conditions of bright sunshine and on certain surfaces.
2. When storing the tool, remove the batteries in case
of leakage.
3. Batteries or damage due to leaking batteries are not
covered under warranty.
