•
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
•
When an extension cable is required, you must ensure it
has the right ampere rating for your power tool and is in a
safe electrical condition.
•
Fully unwind cable drum extensions to avoid potential
overheating.
•
Ensure your mains supply voltage is the same as your
tool rating plate voltage.
•
Your tool is double insulated for additional protection
against a possible electrical insulation failure within
the tool.
•
Always check walls, floors and ceilings to avoid hidden
power cables and pipes.
•
Be careful, after long working periods external metal parts
and accessories could be hot.
•
Do not put pressure on the impact wrench, such that it
slows the motor down. Allow the impact wrench socket to
operate without pressure. You will get better results and
you will be taking better care of your tool.
•
Always switch off before you put the impact wrench down.
•
Ensure that the lighting is adequate.
•
Keep the area free of tripping hazards.
•
Do not touch the socket after operation. It may be hot.
•
Do not let anyone under 18 years operate this tool.
•
Rags, cloths, cord, string and the like should never be left
around the work area.
•
Support the work properly.
•
If you are interrupted when operating the tool, complete
the process and switch off before looking up.
•
Periodically check that all nuts, bolts and other fixings are
properly tightened.
•
When using the impact wrench, use safety equipment
including safety glasses or shield, ear protectors, and
protective clothing including safety gloves. Wear a dust
mask if required.
If in doubt, do not plug in the tool. Using a power source
with a voltage less than the nameplate rating is harmful to
the motor.
The tool must be used only for its prescribed purpose.
Any use other than those mentioned in this Manual will
be considered a case of misuse. The user and not the
manufacturer shall be liable for any damage or injury
resulting from such cases of misuse.
To use this tool properly, you must observe the safety
regulations, the assembly instructions and the operating
instructions to be found in this Manual. All persons who use
and service the machine have to be acquainted with this
Manual and must be informed about its potential hazards.
Children and frail people must not use this tool. Children
should be supervised at all times if they are in the area in
which the tool is being used. It is also imperative that you
observe the accident prevention regulations in force in your
area. The same applies for general rules of occupational
health and safety.
The manufacturer shall not be liable for any changes made
to the tool nor for any damage resulting from such changes.
Even when the tool is used as prescribed it is not possible to
eliminate all residual risk factors. The following hazards may
arise in connection with the tool’s construction and design:
•
Damage to the lungs if an effective dust mask is
not worn.
•
Damage to hearing if effective ear protectors are
not worn.
Wear goggles
Wear ear muffs
Wear a breathing mask
