GMC GTX18250 Instruction Manual Download Page 7

7

   To reduce the risk of an electric shock, unplug the 

charger from the power supply before attempting to 

clean it. Removing the battery alone does not reduce 

the risk.

     Never attempt to connect two chargers together.

   Do not store or use the tool and battery pack in 

locations where the temperature may reach or exceed 

104°F (40°C) such as alongside sheds or metal 

structures in the summer.

     The charger is designed for use from a standard 

household electrical supply (230–240 volts). Do not 

attempt to connect the charger to a supply with a 

different supply.

   If you wish to charge a second battery pack, unplug 

the charger from the mains supply and leave it for at 

least 15 minutes. After this time you can charge a 

second battery pack.

Additional safety instructions for the 

battery pack

     The battery pack for this tool has been shipped in a low 

charge condition.You should charge the battery pack 

fully before use.

     To ensure the longest battery life and best battery 

performance, always charge the battery when the air 

temperature is between 18–24°C. Do not charge the 

battery pack when the temperature is below 0°C, or 

above 40°C. This is important. Failure to observe this 

safety rule could cause serious damage to the battery 

pack.

   Do not incinerate the battery pack even if it is seriously 

damaged or can no longer hold a charge. The battery 

pack can explode in a fire.

    Never attempt to open the battery pack for any reason. 

If the plastic housing of the battery pack breaks open 

or cracks, immediately discontinue its use and do not 

recharge it.

   The battery pack utilizes nickel-cadmium cells. 

Cadmium is considered to be a toxic material. Use an 

environmentally safe disposal unit at a municipal 

waste disposal centre to dispose of a damaged or worn 

out battery.

Unpacking

Due to modern mass production techniques, it is unlikely 

that your GMC Power Tool is faulty or that a part is 

missing. If you find anything wrong, do not operate the 

tool until the parts have been replaced or the fault has 

been rectified. Failure to do so could result in serious 

personal injury.

Summary of Contents for GTX18250














Reviews: