GMC GMCDH-26, Instruction Manual

Page: 15 / 20

Whenever each button is pressed
,
the buzzer will sound
.
To change the timer set
To cancel the timeroperation
operation To stop the timer
Press
" “
button again
.
Press TIMER Button
to set the desired time
.
the Timer lamp will go off
.
Notes
Except
"
Continuous
"
mode operation the timer set will be
cancelled whenever
"
Mode
"
button is pressed
.
Set the
timer again after pressing
"
Mode
"
switch
,
if necessary
.
The timer stops when the water tank is full of water
.
After the tank is emptied
,
the timer will start
.
Note
Buzzer
Be sure to open one of the flaps
.
If the flap is not operned fully during
operation
,
the overheat prevention device will be activated and the unit
will stop operating
.
Due to the protection features of the machine
,
the dehumidifying
operation
will be started arter approx
.
3 minutes
,
when the unit is plugged in or
restarted immediately after being stopped
.
After recovery a power failure
,
mode lamp
will
flash
"
automatic
"
.
press
Efficiency of the dehumidifier is influenced by the air outside the room
.
For operating efficiently
,
try to avoid opening and closing the windows and
the doors
.
For proper performance
,
operate the dehumidifier under the usable operating
temperature
.
For safety purpose
,
the dehumidifying operation will be stopped
automatically and changed to the air cleaning operation when the ambient
Circulation of the refrigerant may cause sound within the dehumidifier when
the operation is started
.
After the circulation is stable
,
the sound will be lowed
.
temperature is higher than approx
.
36
C .
power button again to start the operation
.
Press TIMER
Button
14