Bluetooth Operation
1.
Press “BAND”
button on radio to enter XM mode or CD/AUX button to
enter external CD Changer mode
2.
Use radio volume button to set playback level
Music Commands
To
Proceed this way
Pause a Song
Press and release button
Resume Play
Press and release button
Skip to next song
Press button twice
Skip to Previous Song
Press button 3 times
Activate XM/Aux Playback
*
Press button 4 times
Activate Voice Control
Press/hold button for 2 seconds
Switch out of XM Mode
Press and release button
Phone Commands
To
Proceed this way
Answer call
Press and release button
End call
Press and release button
Reject incoming call
Press button twice (call goes to VM)
Cancel outgoing call
Press button twice
Activate Voice Control
Press/hold button for 2 seconds
Notes:
1.
If playback is distorted, adjust volume on Bluetooth device.
2.
To reset Module press and Hold button for 5 seconds
(this will not
un-pair phone or erase stored phones)
3.
On incoming calls, ring tone will play on car speakers
4.
Bluetooth range is approximately 30 ft. make sure device is within
range
5.
Voice command compatible with Apple (Siri), Android (Google Now),
Blackberry (Assistant)
6.
* Control button will not control XM/Aux functions. Use radio button
assigned to these functions or aux device built-in control for music
selection.
7.
Upon ending call, audio streaming resumes playback, however to
resume XM/AUX control button must be pressed 4 times.
If successful go ahead and Reinstall the Radio
Congratulations, you’ve
just updated your vehicle to support new technology
while preserving the original radio and dash components.
Enjoy!
