GMC Defense 2006, Owner'S Manual Supplement

Page: 18 / 116

2-9
2. Place the barrel into the
upper mount until fully
seated and secure
using the buckle and
strap.
3. Grasp and tug the gun up and down and side-to-
side to ensure the gun is securely installed.
Pioneer Tool Kit
Improperly stored Pioneer Tool Kit could be
thrown about the vehicle during a collision or
sudden maneuver. You or others could be
injured. If you remove the tool kit, always store it
in the proper storage location. When you put it
back, always be sure that is securely reattached
in the mounting brackets.
CAUTION:
The Pioneer Tool Kit is a multi-purpose tool. It
incorporates seven basic hand tools into one
compact unit based on a Hudson Bay-style axe with
a 36 inch handle. All of the attachments are stored
in the carrying case (A) that slides onto the handle
for storage. The entire unit is mounted in brackets
located on the interior rear cab wall. Remove by
pulling out the hitch pin (B) from the axe and lifting
and sliding it off the brackets. When you are finished
using the tool kit, install all tools into the storage
bag. Slide the bag onto the handle, install the axe
into the storage brackets, and install the hitch pin.
For additional information on the usage of this tool
refer to the manufacturer’s instructions.