![background image](http://html.mh-extra.com/html/gmc/dec007en/dec007en_manual_2235706007.webp)
GB
7
Power tool use & care
a. Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
a. Have your power tool se rviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
Multipurpose Engraver Safety
• Always wear safety glasses when engraving
• Do not apply excessive pressure when using this tool
• Keep the cover on the engraving tip when not in use. Keep
your hands clear of the engraving tip when in use
• The manufacturer is not liable for any changes made to the
tool, or for any damage resulting from such changes. Even
when the tool is used as prescribed it is not possible to
eliminate all residual risk factors
920182_Z1MANPRO1.indd 7
20/09/2013 14:10