Chevrolet Equinox Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
14420010) - 2021 - CRC - 11/10/20
302
Vehicle Care
Caution (Continued)
unscrew the inflating hose from the tire
valve. See
.
10. Press the on/off button (5) to turn the
tire sealant and compressor kit off.
Be careful while handling the compressor
as it could be warm after usage.
11. Unplug the power plug (9) from the
accessory power outlet in the vehicle.
12. Turn the air only hose (10)
counterclockwise to remove it from the
tire valve stem.
13. Replace the tire valve stem cap.
14. Return the air only hose (10) and power
plug (9) back to their original storage
location.
15. Return the equipment to its original
storage location in the vehicle.
The tire sealant and compressor kit has
accessory adapters located in a
compartment on the bottom of its housing
that can be used to inflate air mattresses,
balls, etc.
Storing the Tire Sealant and
Compressor Kit
To access the tire sealant and
compressor kit:
1. Open the liftgate. See
.
2. Fold the rear part of the load floor to
the front.
3. Turn the retainer nut counterclockwise to
remove the tire sealant and compressor
kit bag.
4. Remove the tire sealant and compressor
kit from the bag.
To store the tire sealant and compressor kit,
reverse the steps.
Tire Changing
Removing the Spare Tire and Tools
1. Tow Eye (If Equipped)
2. Capless Funnel Adapter (If Equipped)
3. Wheel Wrench
4. Strap
5. Jack
6. Screwdriver (If Equipped)
To access the spare tire and tools:
1. Open the liftgate. See
2. Fold the rear part of the load floor to
the front, pull it rearward to disengage
the clips, then pull upward to remove it.