![background image](http://html.mh-extra.com/html/gmc/cadillac-sts-2010/cadillac-sts-2010_manual_2235710101.webp)
Phone enter: Instructs the system
to dial a phone number after it is
stated. State the number including
the area code (ex. 555 123 4567)
then state “dial.” The phone number
can be stated in partial segments or
the entire phone number can be
stated. If the number is stated in
partial segments the system plays
back each segment.
Correction: Deletes the last
segment of the phone number that
was spoken.
Delete: Deletes the entire phone
number.
Dial: Dials the phone number.
Phone dial name: Instructs
the system to dial the phone number
of a specific previously stored
name. The system responds with
“Name Please”. State the stored
name. The system plays back
the name and requests a
confirmation. Respond with a yes or
no. The system dials the number.
See “Phone Book Screen” under
“Dialing and Making Calls Using
Your Bluetooth
®
Phone” in the
vehicle’s owner manual for more
information on how to store a
nametag.
Phone redial/recall: Instructs the
system to redial a phone number.
Phone help: Instructs the system to
assist with phone commands.
Help commands display on the map
screen when the vehicle is
stopped.
The word “telephone” can be
substituted in place of the word
“phone”.
OnStar
®
Command
OnStar: Instructs the system to
connect to OnStar
®
and the OnStar
®
voice recognition system. Refer to
the OnStar
®
manual for more
information.
Personalization
When starting the vehicle, Driver 1
or Driver 2 displays on the
cluster. If personalization is turned
off in feature programming, a
message will not appear on the
cluster. The number on the back of
the transmitter corresponds to
driver 1 or driver 2. The navigation
system can store memory points
for driver 1 and 2 individually. See
Personalization on page 101 for
more information.
Infotainment System
101
Summary of Contents for Cadillac STS 2010
Page 2: ......