Buick Encore GX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
14018934) - 2020 - CRC - 2/27/20
260
Driving and Operating
5
:
Press to turn the system on or
off. The indicator turns white on the
instrument cluster when ACC is
turned on.
RES+ :
Press the control up briefly
to resume the previous set speed or
to increase vehicle speed if ACC is
already activated. To increase
speed by about 1 km/h (1 mph),
press RES+ up briefly. To increase
speed to the next 5 km/h (5 mph)
mark on the speedometer, hold
RES+.
SET
−
:
Press the control down
briefly to set the speed and activate
ACC or to decrease vehicle speed if
ACC is already activated. To
decrease speed by about 1 km/h
(1 mph), press SET
–
down briefly.
To decrease speed to the next
5 km/h (5 mph) mark on the
speedometer, hold SET
–
.
*
:
Press to disengage ACC
without erasing the selected set
speed.
[
:
Press to select a following gap
setting for ACC of Far, Medium,
or Near.
The speedometer reading can be
displayed in either English or metric
units. See
The increment value used depends
on the units displayed.
Switching Between ACC and
Regular Cruise Control
To switch between ACC and regular
cruise control, press and hold
*
*.
A Driver Information Display (DIC)
message displays. See
ACC Indicator
Regular Cruise
Control Indicator
When ACC is engaged, a green
o
indicator will be lit on the instrument
cluster and the following gap will be
displayed. When the regular cruise
control is engaged, a green
J
indicator will be lit on the instrument
cluster; the following gap will not
display.
When the vehicle is turned on, the
cruise control mode will be set to
the last mode used before the
vehicle was turned off.
{
Warning
Always check the cruise control
indicator on the instrument cluster
to determine which mode cruise
(Continued)
