10
3. Move the On/Off Button (12)
to ON (I) position.
4. Lock the throttle into mid way
‘Start’ position by holding in the
throttle trigger lock-off (2) and
squeezing the throttle trigger
(1) completely in. Release the
throttle trigger lock-off (2) first,
and then release the throttle
trigger (1).
Note.
The throttle trigger (1)
will now be in the mid way
‘Start’ position.
5. Place the unit on a stable
surface and position one
hand on the top of the unit for
support, and use the other to
pull the recoil starter (6).
6. Once the engine has
started, open the air filter
damper (16) slowly.
7. Allow the engine to run for
10 seconds to let it warm up
before use.
8. To increase the engine speed
squeeze the throttle trigger (1).
Note.
To reduce the engine
speed release the throttle lever.
For warm starting:
1. Ensure the priming bulb (9) is full.
2. Move the air filter damper (16) to the half way position.
3. Move the On/Off Button (12)
to ON (I) position.
4. Place the unit on a stable
surface and position one
hand on the top of the unit for
support, and use the other to
pull the recoil starter (6).
5. Once the engine has started,
open the air filter damper (16).
6. Allow the engine to run for
10 seconds to let it warm up
before use.
7. To increase the engine speed
squeeze the throttle trigger (1).
Note.
To reduce the engine
speed release the throttle lever.
Stopping the blower
1. Release the throttle trigger
(1) completely
2. Press the On/Off button (12)
in the Off (O) position.
