Fig. 3
2.
Connect XM 16-pin plug to 16-pin connector on harness (
See Fig. 4)
3.
Connect harness 16-pin plug (See
Fig. 2)
to radio 16-pin cavity vacated in
step 1 (See
Fig. 3
)
Fig. 4
16-pin connector
4.
Carefully route audio jack (See
Fig. 5
) to a location on dash or nearby panel
where it will be mounted. (Cable is 4 ft.)
Mounting l
ocation will vary based on vehicle and customer’s
preference.
Audio jack (active XM)
Audio jack (expired XM)
Fig. 5
Audio Jack
5.
Optional:
Drill a ¼” hole in dash
or panel, push threaded end through hole
and secure with nut (See
Fig. 6
)
Fig. 6
Warning:
Jack may be left freestanding, but to be mounted, ensure
panel is
no thicker than 1/8”
otherwise shaft may not protrude enough
to engage with nut. If necessary, use dremel, sander etc. to thin panel,