GMC 444B Instruction Manual Download Page 8

Carefully read this entire Instruction Manual 

before using this product.

Before returning this product for a
Warranty Claim or any other reason

Please Call 1300 880 001 (Australia)
or 0800 445 721 (New Zealand)

When you make your call, please have the
following information at hand: 

• 

GMC Product Type  

• 

GMC Product Code

A GMC Service Engineer will take your call and,
in most cases, will be able to solve your
problem over the phone. 

You are welcome to use this phone-in service to
make suggestions or give comments about any
GMC product.

With continuing product development changes
may have occurred which render the product
received slightly different to that shown in this
instruction manual. The manufacturer reserves
the right to change specifications without notice.
Note: Specifications may differ from country 
to country.

Save this Manual for future reference.

45–55 South Centre Road
Melbourne Airport
Victoria, Australia 3045
Tel:  +61 3 8346 1100 Fax: +61 3 8346 1200

The GMC 777 Helpline operates from 7am to 7pm, 7 days
a week (EST). This allows you to contact GMC directly
with any queries and technical questions you have
regarding our products.

Summary of Contents for 444B









Reviews: