background image

7

   Support the work properly.

   If you are interrupted when operating the drill, complete 

the process and switch off before looking up.

   Periodically check that all nuts, bolts and other fixings are 

properly tightened.

   When using the drill, use safety equipment including 

safety glasses or shield, ear defenders, and protective 

clothing including safety gloves. Wear a dust mask if the 

drilling operation creates dust.

If in doubt, do not plug in the tool. Using a power source 

with a voltage less than the nameplate rating is harmful to 

the motor.
The tool must be used only for its prescribed purpose. 

Any use other than those mentioned in this Manual will 

be considered a case of misuse. The user and not the 

manufacturer shall be liable for any damage or injury 

resulting from such cases of misuse.
To use this tool properly, you must observe the safety 

regulations, the assembly instructions and the operating 

instructions to be found in this Manual. All persons who use 

and service the machine have to be acquainted with this 

Manual and must be informed about its potential hazards. 
Children and frail people must not use this tool. Children 

should be supervised at all times if they are in the area in 

which the tool is being used. It is also imperative that you 

observe the accident prevention regulations in force in your 

area. The same applies for general rules of occupational 

health and safety.
The manufacturer shall not be liable for any changes  

made to the tool nor for any damage resulting from  

such changes.
Even when the tool is used as prescribed it is not  

possible to eliminate all residual risk factors. The following 

hazards may arise in connection with the tool’s construction 

and design:

   Damage to the lungs if an effective dust mask is not worn.

   Damage to hearing if effective ear defenders are not worn

Additional safety instructions for the charger

     Before using the charger, read all the instructions and 

cautionary markings on the charger and battery pack as 

well as the instructions on using the battery pack.

   Only charge your batteries indoors as the charger is 

designed for indoor use only.

   

DANGER.

 If the battery pack is cracked or damaged in 

any other way, do not insert it in the charger. There is a 

danger of electric shock or electrocution.

 

 WARNING.

 Do not allow any liquid to come into contact 

with the charger. There is a danger of electric shock.

   To allow the battery pack to cool down after charging, do 

not place it in a hot environment such as a metal shed or 

open trailer left in the sun.

   The charger is not intended for any use other than 

charging the exact type of rechargeable battery pack as 

supplied with the charger. Any other use may result in the 

risk of fire, electric shock or electrocution.

   The charger and battery packs supplied with it are 

specifically designed to work together. Do not attempt to 

charge the battery pack with any other charger than the 

one supplied.

    Do not place any object on top of the charger as it could 

cause overheating. Do not place the charger near any 

heat source.

   Do not pull on the lead of the charger to disconnect it 

from the power source.

     Make sure that the charger cable is positioned where 

it will not be stepped on, tripped over or otherwise 

subjected to damage or stress.

   Do not use an extension cord unless it is absolutely 

necessary. The use of an improper extension cord could 

cause the risk of fire, electric shock or electrocution.

   Do not use the charger if it has been subjected to a 

heavy knock, dropped or otherwise damaged in any way. 

Take the charger to an authorised service centre for a 

check or repair.

Summary of Contents for 3G12V

















Reviews: