GMC 2017 Canyon, Owner'S Manual

Page: 197 / 421

GMC Canyon Owner Manual (GMNA-Localizing-U.S./Canada-10122677) -
2017 - crc - 8/22/16
196 Infotainment System
Connecting to a Different Phone
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
order in which all available cell
phones were paired. This may need
to be repeated depending on how
many cell phones have been
connected.
1. Press
g
. The system responds
“ Ready, ” followed by a tone.
2. Say “ Bluetooth. ”
3. Say “ Change phone. ”
.
If another cell phone is
found, the response will be
“ <Phone name> is now
connected. ”
This can be repeated to
connect any of the up to
five paired phones.
.
If another cell phone is not
found, the original phone
remains connected.
Storing and Deleting Phone
Numbers
The following commands are used
to delete and store phone numbers.
Store : This command will store a
phone number or a group of
numbers as a name tag.
Digit Store : This command allows
a phone number to be stored as a
name tag by entering the digits one
at a time.
Delete : This command is used to
delete individual name tags.
Delete All Name Tags : This
command deletes all stored name
tags in the Hands-Free Calling
Directory and the Destinations
Directory.
Using the “ Store ” Command
1. Press
g
. The system responds
“ Ready, ” followed by a tone.
2. Say “ Store. ”
3. Say the entire phone number
or a group of digits all at once
with no pauses, then follow the
directions given by the system
to save a name tag for this
number.
Using the “ Digit Store ” Command
If an unwanted number is
recognized by the system, say
“ Correction ” at any time to clear the
last number.
To hear all of the digits recognized
by the system, say
“ Verify ” at
any time.
1. Press
g
. The system responds
“ Ready, ” followed by a tone.
2. Say “ Digit Store. ”
3. Say each digit, one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone. After
the last digit has been entered,
say
“ Store, ” and then follow the
directions given by the system
to save a name tag for this
number.
Using the “ Delete ” Command
1. Press
g
. The system responds
“ Ready, ” followed by a tone.