GMC 2013 Terrain Owner'S Manual Download Page 52

Page: 52 / 364

Black plate (4,1)

GMC Terrain/Terrain Denali Owner Manual - 2013 - crc 1st edition - 5/8/12

3-4

Seats and Restraints

Power Seat Adjustment

Four-Way Power Seat

1. Seat Position Handle

2. Height Adjustment Control

To adjust a power seat, if equipped:

Move the seat forward or
rearward using the handle under
the front of the seat cushion (1).
See

Seat Adjustment on

page 3

‑

Raise or lower the entire seat by
moving the control (2) up
or down.

To adjust the seatback, see

Reclining Seatbacks on page 3

‑

To adjust the lumbar support, see

Lumbar Adjustment on page 3

‑

Eight-Way Power Seats

To adjust a power seat, if equipped:

Move the seat forward or
rearward by sliding the control
forward or rearward.

Raise or lower the front or rear
part of the seat cushion by
moving the front or rear of the
control up or down.

Raise or lower the entire seat by
moving the entire control up
or down.

Summary of Contents for 2013 Terrain













































































































































































































































































































































































Search results

Summary of Contents for 2013 Terrain

Reviews:

Related manuals for 2013 Terrain

Brands by name

Popular brands

GMC 2013 Terrain, Owner'S Manual

Search results

Summary of Contents for 2013 Terrain

Reviews:

Related manuals for 2013 Terrain

Brands by name

Popular brands