GMC 2012 Terrain Owner'S Manual Download Page 341

Page: 341 / 428

Black plate (67,1)

GMC Terrain Owner Manual (Include Mex) - 2012

Vehicle Care

10-67

Tire Changing

Removing the Spare Tire and
Tools

To access the spare tire and tools:

1. Open the liftgate. See

Liftgate

on page 2

‑

2. Lift the load floor up.

Coin/Pierce Jack with One-Piece

Wrench

A. Extension

B. Wheel Wrench

C. Jack

Hex-Head Jack with Three-Piece

Wrench

A. Wheel Wrench

B. Jack

3. If you have a coin/pierce jack

and one-piece wrench, remove
the extension (A), wheel
wrench (B) and jack (C).

If you have a hex-head jack and
three-piece wrench, remove the
wheel wrench (A) and jack (B).

Place the tools next to the tire
being changed.

Summary of Contents for 2012 Terrain













































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Terrain

Reviews:

GMC 2012 Terrain, Owner'S Manual, Page: 341 / 428

Search results

Summary of Contents for 2012 Terrain

Reviews: