background image

11

MP3 Capability (if equipped) 

A CD-R or CD-RW containing MP3

audio tracks will play automatically when

inserted into the CD player. 

AM/FM Stereo with Six-Disc CD

Changer (if equipped)

Load 

one

CD into the six-disc CD

changer

1. Turn the ignition on; then press and

release the LOAD side of the LOAD

CD button.

2. Wait for the indicator light at the right

side of the slot to turn green.

3. Insert the disc partway into the slot,

label side up; the player will pull the

disc in.

Load 

multiple

CDs into the six-disc

CD changer

1. Turn the ignition on; then press and

hold the LOAD button for two sec-

onds. The unit beeps and the light to

the right of the slot begins to flash

and MULTI LOAD # will appear on

the display.

2. When the light stops flashing and

turns green and INSERT CD #

appears on the display, insert a disc

partway, label side up. The player will

pull the disc in.

3. The indicator light will begin blinking

and then turn green. Load another

disc at this time.

• To load more than one but fewer than

six discs, press the LOAD button

again after loading the final CD.  

• For every CD loaded, a number

appears on the radio display.

• To play a specific CD, press the CD

AUX button and then the number of

the CD you want to hear.

• A small bar appears under the CD

number that is playing, and the track

number appears.

Access Program Type selections for

Six-Disc CD Changer

1. To turn Program Type on, press the

TYPE button once.

2. Turn the TYPE turn knob or press the

TYPE button to select the Program

Type you want.

3. Press the SEEK or TYPE arrows and

the radio seeks to the first available

RDS broadcast of the selected

Program Type.

4. To turn Program Type off (while 

seeking), press the SEEK or TYPE

arrows, or wait for the seek to 

complete. All stations will now be

available when you press the SEEK

button.

Note:

CDs with any affixed labels may

jam in the CD player. Label a CD using

a permanent marker. If more than one

CD is inserted into the slot at one time,

or if scratched or damaged CDs are

played, the CD player could be 

damaged. When using the CD player,

use only CDs in good condition without

labels; load one CD at a time; and keep

the CD player and the loading slot free

of foreign materials, liquids or debris.

Canyon 2008 A  4/3/07  12:36 PM  Page 11

Summary of Contents for 2008 Canyon





















Reviews: