GMC 2007 Envoy Denali Page 353 Owner'S Manual Download | Manualshive

Page: 353 / 562

background image

This is called Gross Vehicle Weight Rating
(GVWR). The GVWR includes the weight of the
vehicle, all occupants, fuel, cargo, and trailer
tongue weight, if pulling a trailer.

The Certification/Tire label also tells you the
maximum weights for the front and rear axles,
called Gross Axle Weight Rating (GAWR). To find
out the actual loads on your front and rear axles,
you need to go to a weigh station and weigh your
vehicle. Your dealer can help you with this. Be sure
to spread out your load equally on both sides of the
centerline.

Never exceed the GVWR for your vehicle, or the
GAWR for either the front or rear axle.

And, if you do have a heavy load, you should
spread it out.

Similar appearing vehicles may have different
GVWRs and capacity weights. Please note your
vehicle’s Certification/Tire label or consult
your dealer for additional details.

{

CAUTION:

Do not load your vehicle any heavier than
the Gross Vehicle Weight Rating (GVWR),
or either the maximum front or rear Gross
Axle Weight Rating (GAWR). If you do,
parts on your vehicle can break, and it
can change the way your vehicle handles.
These could cause you to lose control
and crash. Also, overloading can shorten
the life of your vehicle.

Using heavier suspension components to get
added durability might not change your vehicle’s
weight ratings. Ask your dealer to help you
load your vehicle the right way.

Notice:

Overloading your vehicle may cause

damage. Repairs would not be covered by your
warranty. Do not overload your vehicle.

353

«
...
351
352
353
354
355
...
»

Summary of Contents for 2007 Envoy Denali



















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Envoy Denali

Brand: AAMP of America Pages: 6

2011 grand cherokee

Brand: Jeep Pages: 22

2013 Grand Cherokee

Brand: Jeep Pages: 704

Brand: Jeep Pages: 558

Brand: TATA Motors Pages: 161

Brand: TAUBENREUTHER Pages: 11

Brand: Yakima Pages: 15

SmartDiag2GO GD201-O

Brand: OCTO Pages: 5

Brand: Wagan Pages: 8

Brand: Thermo King Pages: 2

Brand: Spiral Audio Pages: 2

Brand: Oypla Leisure Pages: 4

2007 SLR Mclaren

Brand: Mercedes-Benz Pages: 425

Brand: SAFARI Pages: 5

Ridesmart KMA-610

Brand: KlipXtreme Pages: 12

Brand: Volkswagen Pages: 68

Brand: Xforce Pages: 11

Brand: Yakima Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands