GMC 2006 Canyon, Owner'S Manual

Page: 352 / 434

1. Assemble the wheel wrench (D) and the jack
handle extensions (A) as shown below.
2. Insert the hoist end (chiseled end) of the extension
tool (C) through the hole in the rear bumper and into
the funnel-shaped guide. The chiseled end of the
extension is used to lower the spare tire.
3. Turn the wheel wrench (D) counterclockwise to lower
the spare tire to the ground. Continue to turn the
wheel wrench until the spare tire can be pulled out
from under the vehicle.
If the spare tire does not lower to the ground, the
secondary latch is engaged causing the tire not to
lower. See Secondary Latch System on page 5-84.
4. Tilt the retainer when
the tire has been
lowered, and slide it up
the cable so it can
be pulled up through
the wheel opening.
5. Put the spare tire near the flat tire.
5-76