GMC 2004 YUKON DENALI, Owner'S Manual

Page: 267 / 520

Black plate (53,1)
GMC Yukon Denali/Yukon XL Denali Owner Manual - 2011
Infotainment System 7-53
3. Say each digit, one at a time,
that you want to store. After
each digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered, say
“ Store, ” and then follow the
directions given by the system to
save a name tag for this number.
Using the “ Delete ” Command
1. Press and hold
b g
for
two seconds.
2. Say “ Delete. ”
3. Say the name tag you want to
delete.
Using the “ Delete All Name Tags ”
Command
This command deletes all stored
name tags in the Hands
‐ Free
Calling Directory and the OnStar
Turn
‐ by ‐ Turn Destinations Directory,
if equipped.
To delete all name tags:
1. Press and hold
b g
for
two seconds.
2. Say “ Delete all name tags. ”
Listing Stored Numbers
The list command will list all stored
numbers and name tags.
Using the “ List ” Command
1. Press and hold
b g
for
two seconds.
2. Say “ Directory. ”
3. Say “ Hands ‐ Free Calling. ”
4. Say “ List. ”
Making a Call
Calls can be made using the
following commands.
Dial or Call: The dial or call
command can be used
interchangeably to dial a phone
number or a stored name tag.
Digit Dial: This command allows a
phone number to be dialed by
entering the digits one at a time.
Re ‐ dial : This command is used to
dial the last number used on the cell
phone.
Using the “ Dial ” or “ Call ”
Command
1. Press and hold
b g
for
two seconds.
2. Say “ Dial ” or “ Call. ”
3. Say the entire number without
pausing, or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.