![background image](http://html1.mh-extra.com/html/gmc/2003-duramax/2003-duramax_owners-manual_2235698040.webp)
1. Loosen the screws on the cover of the housing and
lift up the cover.
2. Remove the air cleaner/filter from the housing. Care
should be taken to dislodge as little dirt as possible.
3. Clean the filter sealing surface and the housing.
4. Install the new engine air cleaner/filter.
5. Reinstall the cover and tighten the screws.
6. Reset the air cleaner/filter restriction indicator, if
equipped, by pressing the top button on the
indicator.
Refer to the Maintenance Schedule to determine when
to replace the engine air cleaner/filter.
{
CAUTION:
Operating the engine with the air cleaner/filter
off can cause you or others to be burned.
The air cleaner not only cleans the air, it helps
to stop flame if the engine backfires. If it is
not there and the engine backfires, you could
be burned. Do not drive with it off, and be
careful working on the engine with the air
cleaner/filter off.
Notice: If the air cleaner/filter is off, a backfire can
cause a damaging engine fire. And, dirt can
easily get into your engine, which will damage it.
Always have the air cleaner/filter in place when you
are driving.
5-22
Summary of Contents for 2003 DURAMAX
Page 58: ...NOTES 5 40...
Page 82: ...Maintenance Record cont d Date Odometer Reading Serviced By Maintenance Record 6 24...
Page 83: ...Maintenance Record cont d Date Odometer Reading Serviced By Maintenance Record 6 25...
Page 84: ...Maintenance Record cont d Date Odometer Reading Serviced By Maintenance Record 6 26...