yellow
blue
1-56
5. Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, just unbuckle the vehicle’s
safety belt and let it go back all the way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.
Securing a Child Restraint in a Rear
Outside Seat Position (Crew Cab)
If you have an Extended Cab, see “Securing a Child
Restraint in a Rear Outside Seat Position (Extended
Cab)” earlier in this section.
You’ll be using the lap
-
shoulder belt. See the earlier part
about the top strap if the child restraint has one. Be sure
to follow the instructions that came with the child
restraint. Secure the child in the child restraint when and
as the instructions say.
1. Put the restraint on the seat.
2. Pick up the latch plate, and run the lap and shoulder
portions of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show you how. If the shoulder belt goes in front
of the child’s face or neck, put it behind the
child restraint.
Summary of Contents for 1999 SIERRA CK2
