GMC 1999 Jimmy Owner'S Manual Download Page 30 | Manualshive

Page: 30 / 432

background image

yellow

blue

1-24

The best way to protect the fetus is to protect the
mother. When a safety belt is worn properly, it’s more
likely that the fetus won’t be hurt in a crash. For
pregnant women, as for anyone, the key to making
safety belts effective is wearing them properly.

Right Front Passenger Position

To learn how to wear the right front passenger’s safety belt
properly, see “Driver Position” earlier in this section.

The right front passenger’s safety belt works the same
way as the driver’s safety belt

--

except for one thing.

If you ever pull the shoulder portion of the belt out all
the way, you will engage the child restraint locking
feature. If this happens, just let the belt go back all the
way and start again.

Air Bag System

This part explains the air bag system.

Your vehicle has “Next Generation” frontal
air bags

--

one air bag for the driver and another

air bag for the right front passenger.

Next Generation frontal air bags are designed to help
reduce the risk of injury from the force of an inflating
air bag. But even these air bags must inflate very
quickly if they are to do their job and comply with
federal regulations.

Here are the most important things to know about the air
bag system:

CAUTION:

You can be severely injured or killed in a crash if
you aren’t wearing your safety belt

--

even if you

have air bags. Wearing your safety belt during a
crash helps reduce your chance of hitting things
inside the vehicle or being ejected from it. Air
bags are “supplemental restraints” to the safety
belts. All air bags

--

even Next Generation air

bags

--

are designed to work with safety belts,

but don’t replace them. Air bags are designed to
work only in moderate to severe crashes where
the front of your vehicle hits something. They
aren’t designed to inflate at all in rollover, rear,
side or low

-

speed frontal crashes. And, for

unrestrained occupants, Next Generation air
bags may provide less protection in frontal
crashes than more forceful air bags have
provided in the past. Everyone in your vehicle
should wear a safety belt properly

--

whether or

not there’s an air bag for that person.

«
...
28
29
30
31
32
...
»

Summary of Contents for 1999 Jimmy

















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 1999 Jimmy

Brand: LAMBORGHINI Pages: 48

Brand: Vauxhall Pages: 177

Brand: Whispbar Pages: 16

Brand: Kargo Master Pages: 6

Car Cup Holder Phone Mount

Brand: UGREEN Pages: 9

Code Alarm PROFESSIONAL SERIES CA 5550SST

Brand: Audiovox Pages: 14

Brand: Jeep Pages: 136

Brand: Jeep Pages: 292

Brand: Honda Pages: 24

Brand: Subaru Pages: 44

Brand: Ford Pages: 15

Brand: Honda Pages: 3

Brand: Gentex Pages: 2

FABIA II TMB PS 035

Brand: Skoda Pages: 16

Brand: Brigade Pages: 12

Even Brake 9400

Brand: Roadmaster Pages: 20

Brand: Metra Electronics Pages: 17

Brand: Hamron Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands