background image

6

position.

   Thoroughly inspect the mower for loose or damaged 

parts before each use. Visually inspect to see that 

blades, blade bolts and the cutter assembly are not 

worn or damaged. Do not use the unit until adjustments 

or repairs are made.

   Use only the manufacturer’s recommended replacement 

parts and accessories.

   Always disconnect the mower from the mains when 

leaving it unattended.

   Switch the motor off and pull out the plug when the 

machine is not being used, being cleaned, being moved 

from one place to another or when the blades are being 

changed or adjusted.

   If there is an interruption to the power supply or the 

extension cable is damaged, switch off the machine 

immediately and remove the plug from the power point.

   Inspect and maintain the mower regularly. Have the 

mower repaired only by an authorised repairer.

   If power cord is damaged, only have it repaired or 

replaced by an authorised service centre.

   Check that all grass cuttings and dirt have been 

removed from the ventilation vents.

   When not in use, store the mower out of the reach of 

children and infirm people. 

WARNING. 

In order to reduce the risk, disconnect the 

plug from the supply power, only use recommended 

accessories as required, otherwise personal injury may 

result.

   Do not use the machine to cut grass which is not on 

the ground. For example, do not cut grass which is on 

rocks.

   Do not switch on the machine in enclosed or poorly 

ventilated spaces or in the presence of inflammable 

and/or explosive substances such as liquids, gasses 

and powders.

   Always stop the mower and switch off at the mains 

when cutting is delayed, emptying the grass box or 

when walking from one cutting location to another.

   Do not cross roads or gravel paths with the machine 

still running.

   Do not move the machine by pulling on the electrical 

cable. Always use the handgrip.

   Keep a balanced and stable stance while using the 

machine.

   Ensure that the area being cut is free from stones, 

sticks, wires, bones, and other foreign objects. Remove 

any objects that could be thrown during cutting or could 

wind around the cutting mechanism.

   If you hit or become entangled with a foreign object, 

or the appliance starts to vibrate abnormally, stop the 

motor and disconnect from the mains immediately to 

check for damage. Repair any damage before further 

operation is attempted. Do not operate the mower with 

loose or damaged parts.

   Do not cut against hard objects. This could cause injury 

to the operator and damage to the machine.

   Keep your hands, face and feet away from all moving 

parts.

   If possible, avoid cutting wet grass.

   Exercise proper caution when mowing on sloping 

ground. Watch your footing and wear non-slip footwear. 

Mow along the slope not up and down it. Do not mow 

on steep slopes. Be especially cautious when changing 

direction on slopes – stand above the mower to avoid 

risk of injury.

   Never operate the mower barefoot or when wearing 

open sandals or canvas shoes.

   Do not mow by pulling the machine towards you.

   When mowing, keep the cable away from the mower. 

Your direction of work should be away from the power 

point. Mow in straight lines, not in circles.

Summary of Contents for 1700W

















Reviews: