Caring for System
Store your meter, strips and control solution in your carrying case
after each use. Store in a cool, dry place below 32°C(90°F), but
do not make refrigerated. Keep all items away from direct sunlight
and heat.
Tightly close the cap on the test strip container and/or control
solution vial immediately after use, to avoid contamination or
damage. Store test strips only in their original container.
Storing your system
Your Gmate™WHeeL is maintenance-free.
Checking for expiration to strips and control solution
Caution :
Do not use the strips or control solution after the expiration
date printed on the container or the discard date(date first
opened plus 3 months), or your results may be inaccurate.
Do not use test strips if the container is damaged, broken or
left open to air. It cause to error, or is higher than the actual
result.
38
Test strips and control solution have expiration date, which is
printed on their containers. When open a test strip or control
solution vial first time, you must write down the opening date on
provided label. Use all test strips within 3 months after opening.
Caring for System
To clean up your meter, wipe the outside with a soft cloth,
dampened with water and mild detergent. Do not use alcohol or
any chemical solvent. Do not remain any liquids, dirt, dust, blood
or control solution inside of the test slot.
Cleaning your meter
Clean and wipe the outside of the lancing device with a soft cloth,
dampened with mild detergent and water. Clean the adjustable
cap and clear AST cap with mild detergent. Do not immerse the
lancing device in any liquid.
Cleaning your lancing device and clear AST cap
39
Summary of Contents for WHeeL System
Page 22: ......
