Glyn ACLAVIS TX-LVDS, Manual, Page: 41 / 45

Glyn GmbH & Co KG – ACLAVIS® CoM Baseboard TX-Original 1V1.1 Page 41 of 45
3.4 Working with the Board during developement (Starterkit)
►
Check the BOOTMODE jumper is open (unset)
►
Connect the RS232 cable from a PC to the debug port (ST9) on the StarterKit
►
A terminal program like Windows 'TeraTerm' or Unix based 'minicom',
has to be running on the host PC1. The communication settings are:
Baud rate:115200
Data bits:8
Parity:None
Stop bits:1
Flow control:None (or Xon/Xoff)
(disable hardware handshake (RTS/CTS))
►
Optional Connect TFT to the kit (Chapter 3.2).
►
The Starterkit can be integrated into your local network. We need it for Software
download via TFTP protocol.
►
Connect the Starterkit with a power supply ST9 (10-30V DC). The system will
boot automatically.
►
Linux is usually preinstalled on the module (Module baught as part of a
starterkit!). Just wait until Linux has booted and log in, depending on the
rootfs with the optionally needed password:
User:root
Password:root(optional)