10
Assembly - Hanging the Fan (continued)
Mounting the fan
8
WARNING:
When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.
B
AA
C
G
Installing the acrylic cover or
optional metal cap
9
□
Remove and save the lampshade screws (LL) from acrylic
cover (K).
K
For use with light:
□
Remove and save the lampshade screws (LL) from metal
cap (L).
For use without light:
□
Attach the acrylic cover (K) onto the fan motor
assembly (G) using the lampshade screws (LL).
□
Attach the metal cap (L) onto the fan motor assembly (G)
using the lampshade screws (LL).
G
G
L
G
LL
LL
□
Align the locking slot of the ceiling canopy (C) with the
canopy screw (AA) in the mounting bracket (B). Push up to
engage the slot and turn clockwise to lock in place. Install the
canopy screw (AA) previously removed. Tighten the canopy
screws (AA).
□
Attach the decorative canopy bottom cover (J) onto the
canopy (C) and turn it clockwise to lock in the canopy (C).
□
Loosen the canopy screw (AA) located in the “L-shaped”
slots.
□
Remove the canopy screw (AA) in the round hole.
J
